Daily maintenance of hydraulic push rod

(Summary description)What is the daily maintenance of the hydraulic push rod?

1. Introduction of electro-hydraulic push rod

In general, hydraulic putter manufacturers introduce the following types of hydraulic putter: integral straight, parallel and separated. Different types of electro-hydraulic push rods have different application effects. When we are working on the electro-hydraulic push rod, we only need to operate and roll the motor. It can control the direction of motion according to the positive and negative rolling of the motor.

2. Matters needing attention in the use of electro-hydraulic push rod

Please check the equipment before using the electro-hydraulic putter. Check whether all the equipment is normal, turn on the power; Then oil the machine, close the lid, tighten and fix the surrounding screws, but make sure the air outlet is clear and ventilated; If you are using electro-hydraulic putter in winter, select large capacity equipment to prevent icing and bursting.

Categories:News Center
Author:
Origin:
Time of issue:2020-09-18 13:44
Views:

Information

What is the daily maintenance of the hydraulic push rod?

1. Introduction of electro-hydraulic push rod

In general, hydraulic putter manufacturers introduce the following types of hydraulic putter: integral straight, parallel and separated. Different types of electro-hydraulic push rods have different application effects. When we are working on the electro-hydraulic push rod, we only need to operate and roll the motor. It can control the direction of motion according to the positive and negative rolling of the motor.

2. Matters needing attention in the use of electro-hydraulic push rod

Please check the equipment before using the electro-hydraulic putter. Check whether all the equipment is normal, turn on the power; Then oil the machine, close the lid, tighten and fix the surrounding screws, but make sure the air outlet is clear and ventilated; If you are using electro-hydraulic putter in winter, select large capacity equipment to prevent icing and bursting.

Previous: The characteristics and principle of electrohydraulic palatal valve are introduced

Next: None

Previous: The characteristics and principle of electrohydraulic palatal valve are introduced

Next: None

What are the gaps in the production technology of small electric putter manufacturers

450/5000 Most of the small electric push rod manufacturers in China are formed by the disintegration of large state-owned enterprises, the restructuring of small and medium-sized enterprises and the development of individual enterprises, so the overall level of development is low and there is no uniform standard, but the development prospect of the whole industry is good. The current situation of small electric push rod manufacturers is similar products, low technology content, resulting in weak market competitiveness. With the speeding up of economic, our opportunity came also, as an enterprise, we should be on the market for segmentation, positioning, choose suitable service object, it is important for electric push rod products further deepening, the pursuit of differentiation, so that each enterprise has a clear target market, and form their own features. The current situation of small electric push rod manufacturers is similar products, low technology content, resulting in weak market competitiveness. With the speeding up of economic integration, our opportunity came also, as an enterprise, we should be on the market for segmentation, positioning, choose suitable service object, it is important for electric push rod products further deepening, the pursuit of differentiation, so that each enterprise has a clear target market, and form their own features. Electric push lever technical level gap, first of all in the product structure, hydraulic, pneumatic, sealing and other components are mainly introduced technology or tracking imitation. Secondly, in terms of technological development, due to its own weak ability of scientific research transformation, imported products occupy the majority of the market.

09-15 

Electric hydraulic push rod preferred Mars electromechanical

In 1942, the United States took a laboratory of The Massachusetts Institute of Technology as the center, electric push rod to make a thorough investigation and research on the reliability of the main component of electronic equipment failure vacuum tube. In 1950, the United States established the Department of Defense Electronic Equipment Reliability Task Force of the United States Army, Army and Air Force. In 1952, the Task Force published a report with 17 recommendations on reliability and renamed the Task Force the Department of Defense Electronic Equipment Reliability Advisory Group (AGREE). In 1998, the Japanese Association for Science and Technology established the Reliability Research Committee. In 1962, the journal "Reliability Center" was established in France by the National Institute of Communications for electric putter. In 1965, the International Electrotechnical Commission (IEc) established the Reliability Technical Committee redundancy 56 and held the first academic symposium on electronic product reliability in Tokyo, which unified the national reliability terminology and formulated the standards. ] In 1998, the second symposium on electronic product reliability was held in Budapest. The reliability research in China began in the late 1950s, when the Fourth Ministry of Mechanical Industry established the Reliability Research Institute in Guangzhou. By the 1960s, the Ministry of The Seventh Machinery Industry had also established relevant research institutes. In 1975, the Institute of Applied Mathematics of the Chinese Academy of Sciences held a "Discussion Class on Reliable Mathematics". In 1979, the Institute of Reliability and Quality Management was established by the China Society of Electronics. In 1980, after the national Academic exchange on reliability, many institutions of higher learning offered courses on reliability theory and government use, and carried out research in this field, mainly focusing on the reliability research of electronic products and electronic equipment. National defense industry, aerospace engineering attaches great importance to reliability engineering research, in personnel training, computer gong reliability technology development and other aspects have achieved gratifying results. N5 2 years from the beginning, the Chinese space materials industry group co., LTD. Systematically conducted missile weapon system whole life period reliability guarantee project argumentation and planning work, the more comprehensive and accurate outline of aerospace science: [group work reliability of the overall structure and development train of thought, for the future planned and organized, systematic reliability work laid the foundation.

09-15 

This paper introduces the transmission mechanism and working requirements of electro-hydraulic push rod

Electric hydraulic push rod is a set of machine, electricity, liquid as one of the hydraulic drive manipulator, suitable for the need to reciprocate push and pull straight motion, can also be used to need to rise, fall or clamp the work place, and can realize the remote dangerous area of centralized or automatic control. Electro-hydraulic push rod is a new flexible transmission mechanism integrating machine, electricity and liquid, which is composed of actuator (oil cylinder), control mechanism (hydraulic control valve group) and power source (oil pump motor and so on). The electro-hydraulic putter can have various structural forms according to the site installation space and users' usage (see the outline size diagram of the electro-hydraulic putter for details, or customize the style according to users' requirements). The motor drives the positive and negative output pressure oil of the two-way hydraulic pump through the positive and negative rotation, and sends it to the cylinder through the hydraulic control valve, which also realizes the reciprocating movement of the piston rod. Features of electro-hydraulic push rod: 1. Compact structure, convenient installation, small space occupation and simple maintenance. 2. It can be started with load and has overload protection function. 3. Two-way hydraulic lock is set in the loop, which can stop at any position within the specified travel range and self-lock, and keep the output force unchanged. 4. Push and pull, speed (user requirements) stepless adjustable, wide driving range. 5. Power off for some reason, push rod locks itself to avoid accidents. 6. Full hydraulic transmission, sensitive action, stable operation, buffering external impact force, stroke control ≥0.5mm.

Tel:

18958561828

Add:

Door No. 378, Factory Building Behind Baibu Old Village, Pengjie Town, Luqiao District, Taizhou City, Zhejiang Province

Working hours:

08:00-17:00 (Monday to Saturday)

Partner

Makita (China), Dongfeng Motor Special Equipment, China Shipbuilding Industry Corporation, China Nuclear Industry Construction Co., Ltd., Zhejiang Zhongli Machinery Co., Ltd., Guangxi Marsir Electric Technology have all become "Mars" solid partners, and "Mars" Also exported to the United States, Canada, France, India, Vietnam and other countries.

Attention

Customer service hotline

18958561828 18958561828 18989675592

Service time:

8:00 - 17:00

Customer service group:

在线客服